NEWS
Development Trend Analysis of Electric Forklifts - RMTZN
Date：
2023-05-19 11:42
Scope of application of electric stacker - RMTZN
1. Purpose: To enable warehouse managers to understand the characteristics and structure of the all-electric stacker, and to master the operation process, precautions, and daily maintenance of the all-electric stacker.
2. Operation method:
The warehouse keeper must be familiar with the stacker in an open space. After being familiar with it, he can use it on the first and second floors of the shelf. After being familiar with it for a month, he can operate the third, fourth, and fifth floors of goods. .
1. Start the stacker: check to make sure the battery is fully charged and the indicator light is on. Insert the key into the electric lock, turn it clockwise, and lift the emergency stop switch to start the stacker.
2. Forward/backward of the stacker: turn the control handle of the stacker towards you, and swing down at an appropriate angle. (leave the vertical position but can not be pressed to the lowest position), and then turn the two knob switches with the thumb: if the switch is turned forward, the stacker will move forward, if the switch is turned backward, the stacker will move backward . The forward/reverse speed is controlled by the rotation angle of the knob switch. When starting or when the surrounding space is small, in order to ensure safety, the rotation angle should be controlled to be small to slow down the driving speed. There is a low-speed button on the handle, which limits low-speed driving when pressed.
3. Lifting of the fork of the stacker: Press the button with the rising mark on the control handle with your fingers, and the fork will rise; press the button with the falling mark, and the fork will drop; after releasing it, the lifting will stop immediately.
4. Belly safety start: When the stacker backs up, if your body collides with the red belly switch, the stacker will stop immediately and move a short distance in the opposite direction to the forward direction, mainly to prevent your body from being squeezed and injured .
5. Conventional parking of the stacker: When you need the stacker to stop smoothly, release your thumb, and the rotary switch will automatically reset. At this time, a reverse current will be generated through the controller, and the stacker will move a very small distance Then stop smoothly.
6. Vehicle charging: When the battery meter sends out a flashing signal, that is, the "battery exhausted" alarm, it should be charged in time. When charging, first turn off the electric lock and pull out the key from the electric lock.
3. Operation steps
Loading steps:
1. Move the stacker close to the front of the heavy object;
2. Raise the fork to an appropriate height below the bottom of the heavy object;
3. Move the stacker forward so that the fork reaches below the heavy object;
4. Lift the fork until the heavy object is loaded;
5. The stacker moves back together with the weight until the fork has a space to drop;
6. Slowly lower the weight to an appropriate height.
Putting steps:
1. Move the stacker loaded with heavy objects close to the front of the shelf;
2. Lift the heavy objects to an appropriate height;
3. Move the stacker forward to an appropriate position;
4. Slowly lower the load
5. Slowly move the stacker and its forks out of the shelf .
4. Safety precautions for stacker transportation
1. To move the stacker without load, please lower the fork to the lowest position. Be careful not to injure anyone on the job site. No one can stand on the forks of the stacker.
2. After use, please do not leave the stacker at the work site, stop at the designated place, and pull out the key.
3. You must master the use of the belly switch proficiently, and pay attention to protect yourself.
4. When the load is rising and falling, make sure that no one is standing around, and no one is allowed to stand on the shelf when the vehicle is moving.
5. Vehicle keys shall not be given to personnel outside the warehouse, unless permitted by superiors.
5.
The designated responsible person for daily maintenance shall maintain the designated stacker every day, and if any abnormality is found, it must be reported to the warehouse director in time, and the company's equipment is responsible for the maintenance.
1. Check for oil leakage
2. Check the emergency stop switch
3. Check the horn
4. Check the mobile controller on the control handle
5. Check the wheels and forks
6. Check the lifting chain
7. Check the charger and vehicle power.
8. Check the belly switch
9. Check whether the liquid level of the battery is within the specified range.